BL1800 Jackrabbit

Our most compact and low-cost SBC with 40+ I/O.

• Compact 3.5" x 2.5" size
• 4 serial ports
• Fast clock up to 29.5 MHz
• Multifunctional I/O

BL2000 Wildcat

Low-cost, high-performance SBC with or without Ethernet.

• Up to 28 digital I/O
• Up to 11 A/D and 2 D/A
• 4 serial ports
• Up to 512K Flash / 512K SRAM
• Onboard relay

BL2100 Smartcat

Full-featured SBC with Ethernet and keypad/display options.

• Optional 10Base-T Ethernet
• Up to 512K Flash/512K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A
• 4 serial ports
• Software support enables network connectivity, E-mail, web server

BL2500 Coyote

Low cost SBC built-to-suit OEM custom orders in high-volume quantities.

• Optional 10Base-T or 10/100Base-T Ethernet
• 24 digital I/O plus 3 analog
• 6 serial ports
• Rabbit 3000 @ 29.4 or 44.2 MHz
• Up to 512K Flash / 512K SRAM

BL2600 Wolf

High performance and expandable SBC.

• 10/100Base-T Ethernet
• 36 digital I/O plus 12 analog
• 5 serial ports
• Rabbit 3000 @ 44.2 MHz
• 512K Flash / 512K + 256K SRAM

BL4S100 Single-board Computers

ZigBee enabled Ethernet Gateway

• 10Base-T and optional ZigBee PRO
• 20 digital I/O
• 3 serial ports
• Rabbit 4000 @ 40 MHz
• Up to 2 MB Flash / 1 MB SRAM

BL4S200 Single-board Computers

Wireless or wired connectivity for industrial control

• Choice of Wi-Fi, ZigBee or Ethernet
• 40 digital I/O
• Up to 5 serial ports
• Rabbit 4000 or 5000
• 512K Flash / 512K SRAM

Crystals

Development Kits
Everything you need to begin development!
Our low-cost kits provide a complete embedded design system in a low-cost package.

Development Software
Rabbit's Dynamic C development system allows you to use the flexibility of the C programming language to write powerful and effective programs.

Dynamic C
Full-feature software includes sample programs and TCP/IP libraries: HTTP, ICMP, POP3, TFTP, FTP, SMTP, DHCP, Socket-level UDP, and Socket-level TCP.

Dynamic C 32
Designed for use with all of Z·World's Z180-based products including the OP7100 Smart Screen.

Dynamic C Add-On Modules
Select from a wide range of add-on library modules to customize your programming needs. These low-cost modules are sold separately, allowing you to buy only the software capability your application requires, at an optimum cost-savings.

Ethernet Chips

Events

Expandable Systems
Modular and expandable embedded control systems designed for demanding real-time control and data acquisition applications.

Flash

Headers

LP3500 Fox

Low-power SBC for applications where power is limited.

• Power-save mode draws <100 µA
• Low operating consumption: <20 mA at 7.4 MHz
• 26 industrialized I/O + 1 relay
• 8 A/D converter inputs w/ programmable gain
• 6 serial ports (1 RS-485, 3 RS-232, 2 TTL)
• Optional keypad/display, serial Flash, peripherals

Micro-Fit Cable Assemblies

Microprocessors
High-performance, low-EMI microprocessors designed specifically for embedded control, communications, and Ethernet connectivity.

mini PCI Express Connectors

MiniCore RCM5600W

• Rabbit® 5000 running at 74 MHz
• On-Board single-chip 802.11b/g transceiver
• Up to 35 GP I/O lines and six serial ports
• 1 MB SRAM and 1 MB serial flash memory
• Built-in web server
• Certified to meet FCC and other international regulatory requirements
• Easy-to-use integrated design environment

MiniCore™ RCM5700

• Rabbit® 5000 running @ 50 MHz
• 1 MB Flash Memory
• 35 lines of digital I/O
• Integrated 10/100Base-T
• Up to 6 serial ports
• Small size: 1.186" x 2.006" x 0.11"
  (30 mm x 51 mm x 3 mm)

Miscellaneous Components

OP6700 Intellicom

Optional Ethernet, 4 x 20 LCD; 12-key, user-relegendable keypad.

• 10Base-T Ethernet with RJ-45
• High-visibility backlit, supertwist 4 x 20 LCD
• 12-key, user-relegendable keypad
• 8 industrialized I/O
• Scratch-resistant, self-healing lens

OP6800 MiniCom

Optional Ethernet, 122 x 32 keypad/display, 4 serial ports.

• 122 x 32 graphic display/keypad
• 24 industrialized digital I/O
• Optional 10Base-T Ethernet
• Quick-start menu program
• Meets NEMA 4 water resistance
• 4 serial ports

OP7100 Smart Screen

1/4 VGA touchscreen, 8 x 8 button matrix, and 16 digital I/O.

• 1/4 VGA display (320 x 240 pixels)
• Touchscreen matrix
• Vertical or horizontal orientation
• Wide viewing angle
• 16 digital I/O
• Meets NEMA 4 water resistance

OP7200 eDisplay

Operator interface/HMI with rugged I/O, built-in Ethernet, and optional A/D and touch screen.

• RabbitNet Expansion
• 1/4 VGA display (320 × 240 pixels)
• 8 A/D inputs
• 24-27 industrialized digital I/O
• 10Base-T Ethernet with RJ-45
• Meets NEMA 4 water resistance standards
• 4096 × 4096 analog touchscreen (optional)

Operator Interfaces
Versatile LCD and keypad user interfaces that easily integrate into your system for data entry, command entry, and system monitoring.

Peripherals & Accessories
Expansion cards, serial Flash, resource books, and other accessories for Z-World customers.

PowerCore

Powerful module with on-board power.

• Clock speed up to 51.6 MHz
• On-board Power Supply (10-60 VAC, 8-43 VDC)
• On-board analog ( AC Crossover, ramp generator, temperature sensor )
• Max.1MB Flash
• Max. 1MB SRAM (512K code / 512K storage)
• 39 general-purpose I/O
• 10/100 Compatible Ethernet

Rabbit 2000 Core Modules
Core modules based on the Rabbit 2000 Microprocessor.

Rabbit 3000 Core Modules
Core modules based on the Rabbit 3000 Microprocessor.

Rabbit 4000 Core Modules
Core modules based on the Rabbit 4000 Microprocessor.

Rabbit 5000 Core Modules
Core modules based on the Rabbit 5000 Microprocessor.

RabbitCore Modules
Compact plug-on modules that provide a pre-designed, pre-tested microprocessor core for custom board design.

RabbitNet Expansion Cards
RabbitNet expansion ports enable a modular and expandable embedded control system whose configuration of expansion cards can be tailored to a large variety of demanding real-time control, display, and data-acquisition applications. A typical RabbitNet system consists of a master single-board computer and one or more peripheral cards.

RCM2000 RabbitCore

Low-cost, high-memory, high I/O.

• 1.9" x 2.3" x 0.55"
• 128–512K SRAM
• 256K Flash
• 40 general purpose I/O
• 18.432–25.8 MHz clock

RCM2100 RabbitCore

Most Flash and SRAM, with or without Ethernet.

• 2.0" x 3.5" x 0.86"
• 10Base-T Ethernet
• 128–512K SRAM
• 256–512K Flash
• 34–40 general purpose I/O
• 22.1 MHz clock

RCM2200 RabbitCore

Compact RabbitCore with Ethernet.

• 2.3" x 1.6" x 0.86"
• 10Base-T Ethernet
• 256K–512K Flash
• 128K–512K SRAM
• 26 general purpose I/O
• 22.1 MHz clock

RCM2300 RabbitCore

Most compact, low-cost RabbitCore.

• 1.15" x 1.6" x 0.55"
• 128K SRAM
• 256K Flash
• 29 general purpose I/O
• 22.1 MHz clock

RCM3000 RabbitCore

Our robust and feature-packed Ethernet core module.

• 2.73" x 1.85" x 0.86"
• 10Base-T Ethernet
• 128K–512K SRAM
• 256K–512K Flash
• 52 digital I/O
• 29.4 MHz clock

RCM3100 RabbitCore

Powerful, feature-rich non-Ethernet core module.

• 1.85" x 1.65" x 0.55"
• 128K–512K SRAM
• 256K–512K Flash
• 54 digital I/O
• 29.4 MHz clock

RCM3200 RabbitCore

Most powerful and feature-packed 10/100Base-T Ethernet core module with two SRAMS.

• 2.73" x 1.85" x 0.86"
• With or without 10/100Base-T Ethernet
• Up to 512K SRAM program + 256K data SRAM
• Up to 512K Flash
• 52 digital I/O
• Up to 44.2 MHz clock

RCM3305 RabbitCore

High-performance Ethernet data logging core module.

• 2.73" x 1.85" x 0.86"
• 10/100Base-T, RJ-45 Ethernet
• 512K prog. + 512K data SRAM
• 512K Flash
• 4-8 MB Serial Flash
• 49 digital I/O
• 44.2 MHz clock

RCM3365 RabbitCore

• Up to 128MB removable memory
• 2.73" x 1.85" x 0.86"
• 10/100Base-T, RJ-45 Ethernet
• 512K prog. + 512K data SRAM
• 512K Flash
• 49 digital I/O
• 44.2 MHz clock

RCM3400 RabbitCore

Analog core module with MAC ID installed and 10/100Base-T reference design.

• 1.37" x 1.16" x 0.31"
• 8 channel 12-bit A/D
• 256K–512K SRAM
• 256K–512K Flash
• 47 digital I/O
• 29.5 MHz clock

RCM3600 RabbitCore

Low-cost & compact core module.

• 2.10" x 1.20" x 0.62"
• 128K - 512K SRAM
• 256K - 512K Flash
• 33 digital I/O
• 22.1 MHz clock
• 0.1" IDC header

RCM3700 RabbitCore

Low-cost/Low-profile serial to Ethernet data logging core module.

• 2.95" x 1.20" x 0.88"
• 10Base-T, RJ-45 Ethernet
• 128K-512K SRAM
• 256K-512K Flash
• 1 MB Serial Flash
• 33 digital I/O
• 22.1 MHz clock
• 0.1" IDC header

RCM3750 RabbitCore

Low-cost/Low-profile 10/100Base-T Ethernet, data logging core module.

• 2.95" x 1.20" x 0.89"
• 10/100Base-T, RJ-45 Ethernet
• 512K SRAM
• 512K Flash
• 1 MB Serial Flash
• 33 digital I/O
• 22.1 MHz clock
• 0.1" IDC header

RCM3900 RabbitCores

Ethernet and Extended Temperature

• Up to 1 GB miniSD™ removable memory
• 1.85" x 2.73" x 0.86"
• 10/100Base-T, RJ-45 Ethernet
• 512K prog. + 512K data SRAM
• 512K Flash Memory
• 52 general purpose I/O
• 44.2 MHz clock

RCM4000 RabbitCore

• 2.42" x 1.84" x 0.77"
• 10Base-T, RJ-45 Ethernet
• 512K SRAM/512K Flash
• On board 12-bit A/D
• 32 MB NAND Flash
• Up to 25 GPIO
• 58.98 MHz clock
• 1.27 mm IDC header

RCM4300 RabbitCore

• 58.98 MHz clock speed
• Supports up to 1GB miniSD memory card
• FAT file structure
• 1MB SRAM for shared code / 512KB of battery-backed SRAM
• 10/100Base-T Ethernet port
• Up to 36 general-purpose I/O lines configurable
• Up to 6 serial ports
• Small size: 1.84" x 2.85" x 0.84"

RCM5400W RabbitCore

• Rabbit 5000 running @ 73.73 MHz
• Up to 2 MB of serial flash
• 39 lines of digital I/O
• Integrated IEEE 802.11b/g Wi-Fi
• Up to 6 serial ports
• Small size: 1.84" x 2.85" x 0.50"
  (47 mm x 72 mm x 13 mm)

Seminars

Show Specials

Single-Boards
Board-only configurations that allow you to easily embed intelligence into small spaces and custom enclosures.

Smart Star Modulare Expandable System
The Smart Star is a modular and expandable embedded control system designed for demanding real-time control and data acquisition applications. Multiple I/O card options—including digital, A/D, D/A, and relays—allow users to closely match their specific I/O needs.

Sockets

SRAM

Starter Packages
Everything you need to begin development!
Our low-cost kits provide a complete embedded design system in a low-cost package.

The Parts Store
We are pleased to offer the following components to our customers. All components are recommended for use with Rabbit Semiconductor microprocessors.

top

10/100 Base-T, 3.3 V, 128 pin LQFP Surface-Mount Ethernet Chip
AX88796L
10 pieces.

12 V DC/110 Power Supply

• 110/240 VAC
• Output is 12VDC, 1A
• Replaces 101-0686, as this is a universal power supply now
• Works with the following:
  OP6700
  OP6800
  OP7200
  BL2000
  BL2600
  EG2110
  

12 V DC/110 Universal Power Supply

Works with the majority of the 2000, 3000, and 4000-based Rabbit development systems. Also, comes with a 3 pin connector

2 mm Rabbit Programming Cable
2mm connector for Rabbit 2000-based products, RCM3000/3100, LP3500.

2 x 13, .100" Through-Hole Header
10 Pieces.

2 x 13, 2 mm Surface-Mount Header
10 Pieces.

2 x 13, 2 mm Surface-Mount Socket
10 pieces.

2 x 13, 2 mm Through-Hole Socket
10 pieces.

2 x 17, .100" Through-Hole Header
10 Pieces.

2 x 17, 1.27 mm Surface-Mount Header
10 Pieces.

2 x 17, 1.27 mm Surface-Mount Socket
10 pieces.

2 x 17, 2 mm Surface-Mount Header
10 Pieces.

2 x 17, 2 mm Surface-Mount Socket
10 pieces.

2 x 17, 2 mm Surface-Mount Socket
10 pieces.

2 x 17, 2 mm Through-Hole Header
10 Pieces.

2 x 17, 2 mm Through-Hole Socket
10 pieces.

2 x 20, .100" Surface-Mount Socket
10 Pieces.

2 x 20, .100" Through-Hole Header
10 Pieces.

2 x 20, 1.27 mm Surface-Mount Header
10 Pieces.

2 x 20, 2 mm Surface-Mount Header
10 Pieces.

2 x 20, 2 mm Surface-Mount Socket
10 pieces.

2 x 20, 2 mm Through-Hole Header
10 Pieces.

2 x 20, 2 mm Through-Hole Socket
10 pieces.

2 x 25, 1.27 mm Surface-Mount Socket
10 pieces.

2 x 5, 1.27 mm Surface-Mount Header
10 Pieces.

2 x 5, 2 mm Surface-Mount Header
10 Pieces.

2 x 5, 2 mm Through-Hole Socket
10 pieces.

20 MHz Surface-Mount Crystal
10 pieces.

25 MHz Surface-Mount Crystal
10 pieces.

32 KHz Through-Hole Crystal
10 pieces.

8 x 14 TSOP Surface-Mount Flash
256K x 8, 45 ns, 4KByte/Sectors, 5 V
10 pieces.

8 x 14 TSOP Surface-Mount Flash
256K x 8, 45 ns, 4KByte/Sectors, 3.3 V
10 pieces.

9 V DC/110 Power Supply

Antenna Kit, 2.4 - 2.5 GHz with U.FL to RP-SMA connector cable
Antenna Kit, 2.4 - 2.5 GHz with U.FL to RP-SMA connector cable

Baseplate
Black plastic with screws for mounting.

Battery Board
Replacement Battery Board

BL1800 Jackrabbit

• Rabbit 2000 @ 29.5 MHz
• 256K Flash, 128K SRAM
• 14 Digital I/O
• 3 Analog I/O
• 4 Serial Ports
• 8–40 V DC, 1.2 W max.

BL1800 Jackrabbit Development Kit
Includes everything you need to begin development: BL1800 single-board computer, Dynamic C software, prototyping board, serial cable for programming and debugging, complete documentation on CD-ROM, additional parts, user's manual with schematics, and AC adapter (U.S./Canada only).

BL1800 Jackrabbit w/ 512K SRAM option

• Rabbit 2000 @ 29.5 MHz
• 256K Flash, 512K SRAM
• 14 Digital I/O
• 3 Analog I/O
• 4 Serial Ports
• 8–40 V DC, 1.2 W max.

BL1800 Prototyping Board

BL1810 Jackrabbit

• Rabbit 2000 @ 14.7 MHz
• 128K Flash, 128K SRAM
• 14 Digital I/O
• 3 Analog I/O
• 4 Serial Ports
• 7.5–25 V DC, 100 mA.

BL1820 Jackrabbit

• Rabbit 2000 @ 14.7 MHz
• 128K Flash, 128K SRAM
• 16 Digital I/O
• 3 Analog I/O
• 4 Serial Ports
• No Back Up Battery
• 7.5–25 V DC, 100 mA.

BL2000 Wildcat

• 10Base-T Ethernet with RJ-45
• 24 digital I/O
• 11 A/D and 2 D/A
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 8 LED's

BL2000 Wildcat w/ Bottom Mount Sockets option

• 10Base-T Ethernet with RJ-45
• 24 digital I/O
• 11 A/D and 2 D/A
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 8 LED's
• Bottom Mount Sockets

BL2000 Wildcat w/ Friction Lock Connectors option

• 10Base-T Ethernet with RJ-45
• 24 digital I/O
• 11 A/D and 2 D/A
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 8 LED's
• Friction Lock Connectors

BL2000 Wildcat w/ IDC Headers option

• 10Base-T Ethernet with RJ-45
• 24 digital I/O
• 11 A/D and 2 D/A
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 8 LED's 
• IDC Headers

BL2010 Wildcat

• 10Base-T Ethernet with RJ-45
• 25 digital I/O
• 11 A/D
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 8 LED's

BL2010 Wildcat w/ Bottom Mount Sockets option

• 10Base-T Ethernet with RJ-45
• 25 digital I/O
• 11 A/D
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 8 LED's
• Bottom Mount Sockets

BL2010 Wildcat w/ Friction Lock Connectors option

• 10Base-T Ethernet with RJ-45
• 25 digital I/O
• 11 A/D
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 8 LED's
• Friction Lock Connectors

BL2010 Wildcat w/ IDC Headers option

• 10Base-T Ethernet with RJ-45
• 25 digital I/O
• 11 A/D
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 8 LED's
• IDC Headers

BL2020 Wildcat

• No Ethernet
• 24 digital I/O
• 11 A/D and 2 D/A
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 6 LED's

BL2020 Wildcat w/ Friction Lock Connectors option

• No Ethernet
• 24 digital I/O
• 11 A/D and 2 D/A
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 6 LED's
• Friction Lock Connectors

BL2030 Wildcat

• No Ethernet
• 25 digital I/O
• 11 A/D
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 6 LED's

BL2030 Wildcat w/ Bottom Mount Socket option

• No Ethernet
• 25 digital I/O
• 11 A/D
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 6 LED's
• Bottom Mount Socket

BL2030 Wildcat w/ Friction Lock Connectors option

• No Ethernet
• 25 digital I/O
• 11 A/D
• 4 serial ports
• 256K Flash / 128K SRAM
• Onboard relay
• 6 LED's
• Friction Lock Connectors

BL2100 Smartcat

• 10Base-T Ethernet with RJ-45
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A
• 4 serial ports
• Software support enables network connectivity, E-mail, web server

BL2100 Smartcat Starter Package

BL2100 Smartcat w/ 512K Flash, 512K SRAM option

• 10Base-T Ethernet with RJ-45
• 512K Flash/512K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A
• 4 serial ports
• Software support enables network connectivity, E-mail, web server

BL2100 Smartcat w/ Bottom Mount Connectors option

• 10Base-T Ethernet with RJ-45
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A
• 4 serial ports
• Software support enables network connectivity, E-mail, web server
• Bottom Mount Connectors

BL2100 Smartcat w/ Friction Lock Connectors option

• 10Base-T Ethernet with RJ-45
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A
• 4 serial ports
• Software support enables network connectivity, E-mail, web server
• Friction Lock Connectors

BL2100 Smartcat w/ IDC Headers option

• 10Base-T Ethernet with RJ-45
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A
• 4 serial ports
• Software support enables network connectivity, E-mail, web server
• IDC Headers

BL2110 Smartcat

• 10Base-T Ethernet with RJ-45
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• No Analog I/O
• 4 serial ports
• Software support enables network connectivity, E-mail, web

BL2110 Smartcat w/ 512K Flash, 512K SRAM option

• 10Base-T Ethernet with RJ-45
• 512K Flash/512K SRAM
• 40 sinking/sourcing digital I/O
• No Analog I/O
• 4 serial ports
• Software support enables network connectivity, E-mail, web

BL2110 Smartcat w/ Bottom Mount Sockets option

• 10Base-T Ethernet with RJ-45
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• No Analog I/O
• 4 serial ports
• Software support enables network connectivity, E-mail, web
• Bottom Mount Sockets

BL2110 Smartcat w/ IDC Headers option

• 10Base-T Ethernet with RJ-45
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• No Analog I/O
• 4 serial ports
• Software support enables network connectivity, E-mail, web
• IDC Headers

BL2120 Smartcat

• No Ethernet
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A 
• 4 serial ports
• Software support enables network connectivity, E-mail, web

BL2120 Smartcat w/ Bottom Mount Connectors option

• No Ethernet
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A 
• 4 serial ports
• Software support enables network connectivity, E-mail, web
• Bottom Mount Connectors

BL2120 Smartcat w/ Friction Lock Connectors option

• No Ethernet
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A 
• 4 serial ports
• Software support enables network connectivity, E-mail, web
• Friction Lock Connectors

BL2120 Smartcat w/ IDC Headers option

• No Ethernet
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• 11 A/D and 4 D/A 
• 4 serial ports
• Software support enables network connectivity, E-mail, web
• IDC Headers

BL2130 Smartcat

• No Ethernet
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• No Analog I/O 
• 4 serial ports
• Software support enables network connectivity, E-mail, web

BL2130 Smartcat w/ Bottom Mount Sockets option

• No Ethernet
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• No Analog I/O 
• 4 serial ports
• Software support enables network connectivity, E-mail, web
• Bottom Mount Sockets

BL2130 Smartcat w/ IDC Headers option

• No Ethernet
• 256K Flash/128K SRAM
• 40 sinking/sourcing digital I/O
• No Analog I/O 
• 4 serial ports
• Software support enables network connectivity, E-mail, web
• IDC Headers

BL2500 Coyote

• 10Base-T Ethernet
• 24 digital I/O plus 3 analog
• 6 serial ports
• Rabbit 3000 @ 29.4 MHz
• 256K Flash / 128K SRAM

BL2500 Coyote w/ 10/100 Base-T, 512K Flash, 512K SRAM, 44.2 Clock Speed (Min. 4-day lead time)

• 10/100Base-T Ethernet
• 24 digital I/O plus 3 analog
• 6 serial ports
• Rabbit 3000 @ 44.2 MHz
• 512K Flash / 512K SRAM
• Requires 1.27 mm programming cable

BL2500 Coyote w/512K Flash, 512K SRAM (Min. 4-day lead time)

• 10Base-T Ethernet
• 24 digital I/O plus 3 analog
• 6 serial ports
• Rabbit 3000 @ 29.4 MHz
• 512K Flash / 512K SRAM

BL2500/OEM2500 Coyote Development Kit
Includes BL2500 Coyote, demonstration board, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, AC adapter (U.S./Canada only), and Molex® style crimp pins & housing (standard crimping tool sold separately).

BL2510 Coyote

• 24 digital I/O plus 3 analog
• 6 serial ports
• Rabbit 3000 @ 29.4 MHz
• 256K Flash / 128K SRAM

BL2510 Coyote w/512K Flash, 512K SRAM (Min. 4-day lead time)

• 24 digital I/O plus 3 analog
• 6 serial ports
• Rabbit 3000 @ 29.4 MHz
• 512K Flash / 512K SRAM

BL2600 w/ 10/100Base-T, 512k Flash, 512k SRAM, 16MB NAND Flash, xD removable memory slot

• RCM3365
• 10/100Base-T, 3 LEDs
• 36 digital I/O plus 12 analog
• 5 serial ports
• Rabbit 3000 @ 44.2 MHz
• 512K Flash / 512K + 512K SRAM
  
  

  BL2600 w/ 10/100Base-T, 512k Flash, 512k SRAM, xD removable memory slot
  

  • RCM3375
  • 10/100Base-T, 3 LEDs
  • 36 digital I/O plus 12 analog
  • 5 serial ports
  • Rabbit 3000 @ 44.2 MHz
  • 512K Flash / 512K + 512K SRAM
    
    

    BL2600 w/ 10Base-T, 256K Flash, 128K SRAM option
    

    • 10Base-T
    • 36 digital I/O plus 12 analog
    • 5 serial ports
    • Rabbit 3000 @ 44.2 MHz
    • 256K Flash / 128K SRAM
      
      

      BL2600 w/ 10Base-T, 512K Flash, 512K SRAM option
      

      • 10Base-T
      • 36 digital I/O plus 12 analog
      • 5 serial ports
      • Rabbit 3000 @ 44.2 MHz
      • 512K Flash / 512K SRAM
        
        

        BL2600 Wolf
        

        • 10/100Base-T, 3 LEDs
        • 36 digital I/O plus 12 analog
        • 5 serial ports
        • Rabbit 3000 @ 44.2 MHz
        • 512K Flash / 512K + 256K SRAM
          
          

          BL2600 Wolf Starter Package
          
          

          BL2610 Wolf
          

          • 36 digital I/O plus 12 analog
          • 5 serial ports
          • Rabbit 3000 @ 29.4 MHz
          • 512K Flash / 512K SRAM
            
            

            BL2610 Wolf w/ 256K Flash/128K SRAM option
            

            • 36 digital I/O plus 12 analog
            • 5 serial ports
            • Rabbit 3000 @ 29.4 MHz
            • 256K Flash / 128K SRAM
              
              

              BL4S100 Plastic Enclosure
              

              The BL4S100 plastic enclosure provides a secure way to protect your BL4S100 single-board computer. The enclosure itself may be mounted on any flat surface. The complete plastic enclosure consists of a base and a cover. The base alone is a convenient surface on which to mount the BL4S100, and also provides a means to mount the BL4S100 on any flat surface. The base and cover are sold together.

              
              

              BL4S100 Single-Board Computer
              

              • 10Base-T Ethernet and ZigBee PRO
              • 20 digital I/O
              • 3 serial ports
              • Rabbit 4000 @ 40 MHz
              • 1 MB Flash / 512KB SRAM
              
              

              BL4S100 Starter Package
              

              BL4S100 Starter packages contain the product model of your choice and the BL4S100 Tool Kit.

              
              

              BL4S110 Single-Board Computer
              

              • 10Base-T Ethernet
              • 20 digital I/O
              • 3 serial ports
              • Rabbit 4000 @ 40 MHz
              • 1 MB Flash / 512KB SRAM
              
              

              BL4S150 Single-Board Computer
              

              • 10Base-T Ethernet and ZigBee PRO
              • 20 digital I/O
              • 3 serial ports
              • Rabbit 4000 @ 40 MHz
              • 2 MB Flash / 1 MB SRAM
              
              

              BL4S160 Single-Board Computer
              

              • 10Base-T Ethernet
              • 20 digital I/O
              • 3 serial ports
              • Rabbit 4000 @ 40 MHz
              • 2 MB Flash / 1 MB SRAM
              
              

              BL4S200 Single-Board Computer
              

              • 10/100Base-T Ethernet
              • 40 digital I/O
              • 5 serial ports
              • Rabbit 4000 @ 58.98 MHz
              • 512KB Flash / 512KB SRAM
              • 512KB Program Execution SRAM
              • Up to 1 GB miniSD™ Flash data storage
              
              

              BL4S200 Starter Package
              

              BL4S200 Starter packages contain the product model of your choice and the BL4S200 Tool Kit.

              
              

              BL4S210 Single-Board Computer
              

              • 10Base-T Ethernet
              • 40 digital I/O
              • 4 serial ports
              • Rabbit 4000 @ 58.98 MHz
              • 512KB Flash / 512KB SRAM
              
              

              BL4S230 Single-Board Computer
              

              • ZigBee 2007 (802.15.4)
              • 40 digital I/O
              • 5 serial ports
              • Rabbit 4000 @ 29.49 MHz
              • 512KB Flash / 512KB SRAM
              
              

              BL5S220 Single-Board Computer
              

              • Wi-Fi (802.11b/g)
              • 40 digital I/O
              • 5 serial ports
              • Rabbit 5000 @ 73.73 MHz
              • 512KB Flash / 512KB SRAM
              • 1 MB Program Execution SRAM
              
              

              Bluetooth Add-On Kit
              Rabbit-based applications now have even more ways to communicate. Rabbit Semiconductor has added Bluetooth® support for selected core modules, the BL2500 and the BL2600 single board computers. Based on the EmbeddedBlue™ eb506 AHC IN Bluetooth Radio Module from A7 Engineering.
              

              Bluetooth Application Kit
              Integrate Bluetooth as your embedded wireless solution. Includes RCM3100, Bluetooth module, and development software.
              

              Cable & Mounting Hardware
              Provides connection for keyboard/display option to SR9050 backplane.
              

              Cable USB A to Mini USB B 1.8 m
              Cable USB A to Mini USB B 1.8 m
              

              Camera Interface Application Kit
              

              The Camera Interface Application Kit combines a VGA camera with a popular RabbitCore module that has removable memory to provide an event-capture application. An easy-to-use web interface allows you to control the camera movement using servo motors, and an infrared motion sensor is used to trigger an image capture under software control. A user-configured event notification system is activated, which includes an e-mail of the event with a photo link.
              
              The Camera Interface Application Kit serves as an example for a Rabbit-based system using a camera for remote monitoring, security, asset management, as a supplement to alarm systems, and countless other event-action systems. The kit contains two servos that allow for pan-and-tilt motion, an infrared Camera motion detector for event triggering, and an RCM3365 RabbitCore module for control. Because the RCM3365 provides up to 128 MB of storage and Ethernet functionality, the system allows the user to store and manage photos, send event notifications via email or send the logged files to an FTP server.

              
              

              Color Touchscreen Application Kit
              

              The Reach Technology Color Touchscreen with a RabbitCore creates an application kit that provides embedded systems integrators the ability to add advanced interface functionality to embedded systems. Color touchscreens provide real-time feedback, allowing for better control in industrial-automation applications.

              
              

              Connectivity Kit
              Each kit contains sufficient friction-lock connectors and crimp terminals to interface with one BL2600, BL2500/OEM2500, RN1100, RN1200, RN1300, RN1400, or RN1600.
              

              Connector Adapter Board
              Panel of five boards scored for seperation. For RCM2XXX/BL1800 boards.
              

              Connector Adapter Board
              Panel of five boards scored for seperation. For RCM3XXX boards.
              

              Connector Adapter Board Convenience Pack
              Includes one board and assorted connectors for RCM3XXX boards.
              

              Connector Adapter Board Convenience Pack
              Includes one board and assorted connectors for RCM2XXX/BL1800 boards.
              

              Connector Cable
              2 x 5, 2 mm, 12" cable to serial interface with Rabbit-based products.
              

              Connector mini PCI Express
              
              

              Connector mini PCI Express
              
              

              DB9 to 10-Pin Flat Ribbon Connector Serial Cable
              
              

              Desarrollo con procesadores y módulos Rabbit
              Sergio R. Caprile, an engineer and expert in embedded technology, responsible for seminars, courses and articles on Rabbit, brings us the first book in Spanish on Rabbit. In the hope of guiding first time users, Mr. Caprile clearly and effectively informs us through easy to use experiments the possibilities of this interesting family of products. In this clearly and concisely written pleasant volume, he introduces us to the Rabbit universe. Up to date graphics that are clearly ordered and developed facilitate easy comprehension by the reader.
              

              Dynamic C 10.54
              Version 10.54 for Rabbit 4000 products.
              Shipped CD
              

              Dynamic C 32
              Version 6.30
              Shipped CD
              For Zilog based products.
              

              Dynamic C 9.62
              Version 9.62 for Rabbit 2000 and 3000 products.
              Shipped CD
              

              Dynamic C Documentation
              Dynamic C User's Manual & Function Reference Manual (Printed, 700+ pages.)
              

              EEPROM, serial, w/MAC address, Surface-Mount
              10 pieces.
              

              EG2110 RabbitLink
              RabbitLink facilitates remote programming and debugging of any Rabbit microprocessor-based system. It also provides a portal to the Internet for most embedded systems with a serial port, serving web pages and sending E-mail.
              

              Embedded Ethernet and INTERNET Complete Designing and programming small devices for networking
              Textbook by Jan Axelson.
              

              Embedded PLC Application Kit
              

              The Embedded PLC Application Kit gives you everything you need to get started programming a Rabbit Semiconductor SBC with the ISaGRAF PLC programming system. Included in the kit is the BL2500, an advanced single-board computer that incorporates flash memory, SRAM, digital I/O ports, analog I/O, RS-232/RS-485 serial ports and a 10/100baseT Ethernet port. The BL2500 single-board computer provides control and automation engineers with a powerful and low-cost embedded solution, suitable for high-volume applications such as factory equipment control, access control, HVAC, and vending machines. The BL2500’s compact board size of 100 x 100 mm is easily mountable in standard 100 mm DIN rail trays. External connections are provided via polarized friction locking connectors, enabling rapid assembly using wire harnesses.

              
              

              Embedded Security Module 1.01
              

              Version 1.01 for Rabbit 2000 and 3000 products
              Shipped CD

              
              

              Embedded Security Module 3.01
              

              Version 2.01 for Rabbit 4000 products
              Shipped CD

              
              

              Embedded Systems Design using the Rabbit 3000 Microprocessor
              Let the experts teach you how to design embedded systems that efficiently hook up to the Internet using networked core modules. Provides a number of projects and source code using RabbitCore, which will make it easy for the system designer and programmer to get hands-on experience developing networked devices.
              

              Ethernet Connection Kit
              Includes RCM3720 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              Ethernet Transformer, 10Base-T, Surface-Mount
              10 pieces.
              

              FAT Software Module 1.02
              Version 1.02
              Download delivery
              

              FAT Software Module for Dynamic C 8
              Version 1.02
              Shipped CD
              

              Fit 2x3 Micro-Fit Connector
              

              6-pin 2x3 MicroFit Connector - 18 in long

              
              

              Fit 2x5 Micro-Fit Connector
              

              10-pin 2x5 MicroFit Connector - 18 in long

              
              

              Fit 2x7 Micro-Fit Connector
              

              14-pin 2x7 MicroFit Connector - 18 in long

              
              

              Friction-Lock Connectivity Kit
              Each kit contains sufficient friction-lock connectors and crimp terminals to interface with one BL2100.
              

              FWT18 Smart Star Field Wiring Terminal
              
              

              FWT18R Smart Star Field Wiring Terminal
              
              

              FWT27 Smart Star Field Wiring Terminal
              
              

              iDigi BL4S100 Add-on Kit
              The iDigi BL4S100 Add-On Kit ZB includes all the hardware and software tools to add wireless embedded control to a ZigBee network.
              

              iDigi BL4S100 Add-on Kit
              
              

              iDigi™ BL4S100 Add-On Kit ZB
              

              The iDigi™ BL4S100 Add-On Kit ZB includes all the hardware and software tools to add wireless embedded control to a ZigBee network through the iDigi platform. Using the iDigi platform, developers can rapidly deploy and manage their applications remotely across a ZigBee network through the iDigi platform when combined with the iDigi X4 Starter Kit ZB. The BL4S100 adds intelligent I/O to the iDigi platform that can be easily programmed to perform supervisory tasks as well as provide localized control of devices that are connected to a ZigBee network.

              
              

              iDigi™ Wi-9P Starter Kit ZB
              

              The iDigi Wi-9P Starter Kit ZB includes all of the tools necessary to easily develop wireless embedded applications on an ARM9 processor using the iDigi platform.

              
              

              iDigi™ X4 Starter Kit ZB
              

              The iDigi X4 Starter Kit ZB includes all the hardware and software tools necessary to deploy and configure a ZigBee network through the iDigi platform. By using the iDigi platform, developers can rapidly deploy and manage their applications remotely across a ZigBee network through an IP connection, without the need to program middleware applications.

              
              

              iDigi™ X4 Starter Kit ZB + iDigi™ BL4S100 Add-on Kit ZB
              

              The iDigi X4 Starter Kit ZB includes all the hardware and software tools necessary to deploy and configure a ZigBee network through the iDigi platform. By using the iDigi platform, developers can rapidly deploy and manage their applications remotely across a ZigBee network through an IP connection, without the need to program middleware applications. The iDigi™ BL4S100 Add-On Kit ZB is included in this package

              
              

              Keypad/Display Unit
              Plugs directly into prototyping board.
              

              Keypad/Display Unit
              Plugs directly into prototyping board.
              

              Keypad/Display Unit Cable
              5" cable provides connection for keypad/display unit to controller, SR9010 or SR9050 backplane.
              

              Keypad/Display Unit Cable
              20" cable for panel-mount keypad/display unit.
              

              Keypad/Display Unit w/Case
              Integrated keypad/display with case, 7-key/122 x 32 pixel LCD.
              

              Latch connector mini PCI Express
              
              

              Light Pipes
              Packet of 4 (two packets required per enclosure)
              

              LP3500
              

              • Power-save mode draws <100 µA
              • Low operating consumption: <20 mA at 7.4 MHz
              • 512K (2 x 256K) Flash, 512K SRAM
              • 26 industrialized I/O + 1 relay
              • 8 A/D converter inputs w/ programmable gain
              • 6 serial ports (1 RS-485, 3 RS-232, 2 TTL)
              • Optional keypad/display, serial Flash, peripherals
              
              

              LP3500 Fox Starter Package
              
              

              LP3510
              

              • Power-save mode draws <100 µA
              • Low operating consumption: <20 mA at 7.4 MHz
              • 256K Flash, 128K SRAM
              • 26 industrialized I/O 
              • 6 serial ports (1 RS-485, 3 RS-232, 2 TTL)
              • Optional keypad/display, serial Flash, peripherals
              
              

              Mesh Network Add-On Kit
              

              The Mesh Network add-on kit allows you to explore the wireless capabilities of BL4S100/BL4S150 single-board computers. The kit contains a Digi® XBee® USB (used as a ZigBee coordinator), an XBee ZB RF module (ZigBee PRO compliant), and an RF interface module.

              
              

              MicroC/OS II, The Real-Time Kernel
              Second edition textbook by Jean J Labrosse.
              

              MiniCore Deluxe Development Kit Power Supply
              

              Power supply for RCM5600W and RCM5700 development kits, used to power the interface board and MiniCore module independent of the USB programming cable.

              
              

              MiniCore Interface Board
              MiniCore Interface Board
              

              MiniCore Prototyping Board
              MiniCore Prototyping Board
              

              MiniCore RCM5600W
              

              • Rabbit® 5000 running at 74 MHz
              • On-Board single-chip 802.11b/g transceiver
              • Up to 35 GP I/O lines and six serial ports
              • 1 MB SRAM and 1 MB serial flash memory
              • Built-in web server
              • Certified to meet FCC and other international regulatory requirements
              • Easy-to-use integrated design environment
              
              

              MiniCore RCM5700
              

              • Rabbit® 5000 running @ 50 MHz
              • 1 MB Flash Memory
              • 35 lines of digital I/O
              • Integrated 10/100Base-T
              • Up to 6 serial ports
              • Small size: 1.186" x 2.006" x 0.11"
                (30 mm x 51 mm x 3 mm)
              
              

              Molex® Crimp Tool
              For crimp pins provided in development kit. (Other tools may not provide a reliable crimp.)
              

              Multi-Port Serial-to-Ethernet Application Kit
              The Rabbit Serial-to-Ethernet Kit provides the hardware and software necessary for sensors and other serial devices to communicate via a LAN or other network.
              

              OP6600 Intellicom
              

              • High-visibility backlit, supertwist 4 x 20 LCD
              • 12-key, user-relegendable keypad
              • 8 industrialized I/O
              • Scratch-resistant, self-healing lens
              
              

              OP6600 Intellicom with 512K SRAM
              

              • 512K SRAM
              • High-visibility backlit, supertwist 4 x 20 LCD
              • 12-key, user-relegendable keypad
              • 8 industrialized I/O
              • Scratch-resistant, self-healing lens
              
              

              OP6600 Intellicom with Vacuum Fluorescent Display
              

              • Vacuum Fluorescent Display
              • 12-key, user-relegendable keypad
              • 8 industrialized I/O
              • Scratch-resistant, self-healing lens
              
              

              OP6700 Intellicom
              

              • 10Base-T Ethernet with RJ-45
              • High-visibility backlit, supertwist 4 x 20 LCD
              • 12-key, user-relegendable keypad
              • 8 industrialized I/O
              • Scratch-resistant, self-healing lens
              
              

              OP6700 Intellicom with 512K SRAM
              

              • 512K SRAM
              • 10Base-T Ethernet with RJ-45
              • High-visibility backlit, supertwist 4 x 20 LCD
              • 12-key, user-relegendable keypad
              • 8 industrialized I/O
              • Scratch-resistant, self-healing lens
              
              

              OP6800 MiniCom
              

              • 122 x 32 graphic display/keypad
              • 24 industrialized digital I/O
              • Optional 10Base-T Ethernet
              • Quick-start menu program
              • Meets NEMA 4 water resistance
              • 4 serial ports
              
              

              OP6800 MiniCom Starter Package
              
              

              OP6800 MiniCom with 512K Flash, 512K SRAM
              

              • 512K Flash / 512K SRAM
              • 122 x 32 graphic display/keypad
              • 24 industrialized digital I/O
              • Optional 10Base-T Ethernet
              • Quick-start menu program
              • Meets NEMA 4 water resistance
              • 4 serial ports
              
              

              OP6810 MiniCom
              

              • 122 x 32 graphic display/keypad
              • 24 industrialized digital I/O
              • Quick-start menu program
              • Meets NEMA 4 water resistance
              • 4 serial ports
              
              

              OP7100 Smart Screen
              

              • 1/4 VGA display (320 x 240 pixels)
              • Touchscreen matrix
              • Vertical or horizontal orientation
              • Wide viewing angle
              • 16 digital I/O
              • Meets NEMA 4 water resistance
              
              

              OP7100 Smart Screen with 512K SRAM
              

              • 512K SRAM
              • 1/4 VGA display (320 x 240 pixels)
              • Touchscreen matrix
              • Vertical or horizontal orientation
              • Wide viewing angle
              • 16 digital I/O
              • Meets NEMA 4 water resistance
              
              

              OP7200 eDisplay
              

              • RabbitNet Expansion
              • 1/4 VGA display (320 x 240 pixels)
              • 8 A/D inputs
              • 24-27 industrialized digital I/O
              • 10Base-T Ethernet with RJ-45
              • Meets NEMA 4 water resistance standards
              • 4096 x 4096 analog touchscreen
              
              

              OP7200 eDisplay Starter Package
              
              

              OP7210 eDisplay
              

              • RabbitNet Expansion
              • 1/4 VGA display (320 x 240 pixels)
              • 8 A/D inputs
              • 24-27 industrialized digital I/O
              • 10Base-T Ethernet with RJ-45
              • Meets NEMA 4 water resistance standards
              
              

              Panel-Mount Keypad/Display Unit.
              Water-resistant remote keypad/display, 7-key/122 x 32 pixel LCD, for 5V systems only. (Cable not included, see below).
              

              PowerCore 3800
              

              • Rabbit 3000 @ 51.6 MHz
              • On-board Power Supply (2A, 8-43 V DC, 24-60.8 V AC)
              • On-board analog ( Ramp Generator, AC Crossover Detection, Temperature Sensor )
              • 512K Flash
              • 1MB Serial Flash
              • 1MB SRAM (512K code / 512K data)
              • 39 general-purpose I/O
              • 10/100 Compatible Ethernet
              
              

              PowerCore 3810
              

              • Rabbit 3000 @ 25.8 MHz
              • On-board Power Supply (1A, 8-40.7 V DC, 19-57.6 V AC)
              • On-board analog ( Ramp Generator, AC Crossover Detection, Temperature Sensor )
              • 512K Flash
              • 256K SRAM
              • 39 general-purpose I/O
              
              

              PowerCore Development Kit
              Jumpstart your evaluation and design efforts with a complete development kit, which includes a PowerCore of your choice, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              PPP Software Module 1.05
              Version 1.05
              Download delivery
              

              PPP Software Module for Dynamic C 8
              Versio 1.05
              Shipped CD
              

              Practical Embedded Security
              This book builds upon the basics of computer security and optimizes it for embedded systems. Often embedded systems are resource-constrained systems and therefore, may not have the power to implement robust security systems. The author takes on this problem guiding embedded designers, programmers, and engineers on how to build secure, low-cost, and resource-constrained systems.
              

              Rabbit 2000 PQFP (2 pack)
              Low-cost microprocessor designed specifically for embedded systems.
              

              Rabbit 2000 TCP/IP Development Kit
              Includes a TCP/IP development board (with Rabbit 2000 microprocessor, Flash, SRAM, Ethernet hardware, serial ports, digital I/O), demonstration board, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              Rabbit 3000 LQFP (2 pack)
              Low EMI microprocessor designed for embedded control, communications, and Ethernet connectivity.
              

              Rabbit 4000 LQFP (2 pack)
              Low-cost microprocessor designed specifically for embedded systems.
              

              Rabbit Cloning Board
              Ideal for copying compiled software programs from one Rabbit-based product to another and for use in a production environment.
              

              Rabbit Rio (2 pack)
              A versatile programmable I/O chip, featuring I/O expansion and specialty features compatible with any processor that has an available clocked serial port.
              

              RabbitSys Development Kit
              Includes RCM3365 RabbitSys Core Module, Prototyping Board, xD-Picture Card, Dynamic C 9.3x to support RabbitSys, RabbitSys CD, FAT File v. 2.11, Cables and Accessories, Getting Started Manual,Power Supply (U.S./Canada only).
              

              RCM2000 Prototyping Board
              
              

              RCM2000 RabbitCore
              

              • 1.9" x 2.3" x 0.55"
              • 512K SRAM
              • 256K Flash
              • 40 general purpose I/O
              • 25.8 MHz clock
              
              

              RCM2000/RCM2100 Accessory Kit
              Includes RS-232 chip, capacitors, LEDs, 2 x 20 headers, and a 2 x 5 header.
              

              RCM2010 RabbitCore
              

              • 1.9" x 2.3" x 0.55"
              • 128K SRAM
              • 256K Flash
              • 40 general purpose I/O
              • 25.8 MHz clock
              
              

              RCM2020 RabbitCore
              

              • 1.9" x 2.3" x 0.55"
              • 128K SRAM
              • 256K Flash
              • 40 general purpose I/O
              • 18.432 MHz clock
              
              

              RCM2100 Prototyping Board
              
              

              RCM2100 RabbitCore
              

              • 3.5" x 2.0" x 0.86"
              • 10Base-T Ethernet
              • 512K SRAM
              • 512K Flash
              • 34 general purpose I/O
              • 22.1 MHz clock
              
              

              RCM2110 RabbitCore
              

              • 3.5" x 2.0" x 0.86"
              • 10Base-T Ethernet
              • 128K SRAM
              • 256K Flash
              • 34 general purpose I/O
              • 22.1 MHz clock
              
              

              RCM2120 RabbitCore
              

              • 3.5" x 2.0" x 0.5"
              • 512K SRAM
              • 512K Flash
              • 40 general purpose I/O
              • 22.1 MHz clock
              
              

              RCM2130 RabbitCore
              

              • 3.5" x 2.0" x 0.5"
              • 128K SRAM
              • 256K Flash
              • 40 general purpose I/O
              • 22.1 MHz clock
              
              

              RCM2200 RabbitCore
              

              • 2.3" x 1.6" x 0.86"
              • 10Base-T, RJ-45, 2 LEDs
              • 256K Flash
              • 128K SRAM
              • 26 general purpose I/O
              • 22.1 MHz clock
              
              

              RCM2200/RCM2300 Accessory Kit
              Includes jumpers, 2 x 13 sockets, 2 x 13 headers, and a 2 x 4 header.
              

              RCM2200/RCM2300 Prototyping Board
              
              

              RCM2210 RabbitCore
              

              • 2.3" x 1.6" x 0.86"
              • 10Base-T, (raw signals only)
              • 256K Flash
              • 128K SRAM
              • 26 general purpose I/O
              • 22.1 MHz clock
              
              

              RCM2250 RabbitCore
              

              • 2.3" x 1.6" x 0.86"
              • 10Base-T, RJ-45, 2 LEDs
              • 512K Flash
              • 512K SRAM
              • 26 general purpose I/O
              • 22.1 MHz clock
              
              

              RCM2260 RabbitCore
              

              • 2.3" x 1.6" x 0.86"
              • 10Base-T (raw signals only) 
              • 512K Flash
              • 512K SRAM
              • 26 general purpose I/O
              • 22.1 MHz clock
              
              

              RCM2300 RabbitCore
              

              • 1.15" x 1.6" x 0.55"
              • 128K SRAM
              • 256K Flash
              • 29 general purpose I/O
              • 22.1 MHz clock
              
              

              RCM30/31/3200 Accessory Kit
              Includes two 2 x 17 .01" headers and two 2 x 17 2mm female sockets.
              

              RCM30/31/3200 Prototyping Board
              
              

              RCM3000 RabbitCore
              

              • 2.73" x 1.85" x 0.86"
              • 10Base-T Ethernet
              • 512K SRAM
              • 512K Flash
              • 52 digital I/O
              • 29.4 MHz clock
              
              

              RCM3000 RabbitCore Development Kit
              Includes RCM3010 microprocessor core module, prototyping board, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM3010 RabbitCore
              

              • 2.73" x 1.85" x 0.86"
              • 10Base-T Ethernet
              • 128K SRAM
              • 256K Flash
              • 52 digital I/O
              • 29.4 MHz clock
              
              

              RCM3100 RabbitCore
              

              • 1.85" x 1.65" x 0.55"
              • 512K SRAM
              • 512K Flash
              • 54 digital I/O
              • 29.4 MHz clock
              
              

              RCM3100 RabbitCore Development Kit
              Includes RCM3100 microprocessor core module, prototyping board, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual and, AC adapter (U.S./Canada only).
              

              RCM3110 RabbitCore
              

              • 1.85" x 1.65" x 0.55"
              • 128K SRAM
              • 256K Flash
              • 54 digital I/O
              • 29.4 MHz clock
              
              

              RCM3200 RabbitCore
              

              • 2.73" x 1.85" x 0.86"
              • 10/100Base-T Ethernet
              • 512K program + 256K data SRAM
              • 512K Flash
              • 52 digital I/O
              • 44.2 MHz clock
              
              

              RCM3200 RabbitCore Development Kit
              Includes RCM3200 microprocessor core module, prototyping board, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM3220 RabbitCore
              

              • 2.73" x 1.85" x 0.48"
              • 512K program + 256K data SRAM
              • 512K Flash
              • 52 digital I/O
              • 44.2 MHz clock
              
              

              RCM3300 Prototyping Board
              
              

              RCM3305 RabbitCore
              

              • 2.73" x 1.85" x 0.86"
              • 10/100Base-T, RJ-45 Ethernet
              • 512K prog. + 512K data SRAM
              • 512K Flash
              • 8 MB Serial Flash
              • 49 digital I/O
              • 44.2 MHz clock
              
              

              RCM3305 RabbitCore Development Kit
              Includes RCM3305 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM3315 RabbitCore
              

              • 2.73" x 1.85" x 0.86"
              • 10/100Base-T, RJ-45 Ethernet
              • 512K prog. + 512K data SRAM
              • 512K Flash
              • 4 MB Serial Flash
              • 49 digital I/O
              • 44.2 MHz clock
              
              

              RCM3365 RabbitCore
              

              • 2.73" x 1.85" x 0.86"
              • 10/100Base-T, RJ-45 Ethernet
              • 512K prog. + 512K data SRAM
              • 512K Flash
              • 32 MB NAND Flash (chip) with xD card socket
              • 52 digital I/O
              • 44.2 MHz clock
              
              

              RCM3365 RabbitCore Development Kit
              Includes RCM3365 microprocessor core module, 32MB memory card, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM3365 RabbitSys Core Module
              

              • Preloaded with the RabbitSys Operating System
              • 2.73" x 1.85" x 0.86"
              • 10/100Base-T, RJ-45 Ethernet
              • 512K prog. + 512K data SRAM
              • 512K Flash
              • 16 MB NAND Flash (chip) with xD card socket
              • 52 digital I/O
              • 44.2 MHz clock
              
              

              RCM3375 RabbitCore
              

              • 2.73" x 1.85" x 0.86"
              • 10/100Base-T, RJ-45 Ethernet
              • 512K prog. + 512K data SRAM
              • 512K Flash
              • xD card socket
              • 52 digital I/O
              • 44.2 MHz clock
              
              

              RCM3400 Accessory Kit
              Accessory kit includes thermistor, one 2 x 30 0.1" header, one 2 x 5 0.1" header, five 0.1" jumpers, and two 2 x 17 1.27mm SMT female sockets.
              

              RCM3400 Prototyping Board
              
              

              RCM3400 RabbitCore
              

              • 1.37" x 1.16" x 0.31"
              • 8 channel 12-bit A/D
              • 512K SRAM
              • 512K Flash
              • 47 digital I/O
              • 29.5 MHz clock
              
              

              RCM3400 RabbitCore Development Kit
              Includes RCM3400 microprocessor core module, development board with 10/100Base-T Ethernet and prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM3410 RabbitCore
              

              • 1.37" x 1.16" x 0.31"
              • 8 channel 12-bit A/D
              • 256K SRAM
              • 256K Flash
              • 47 digital I/O
              • 29.5 MHz clock
              
              

              RCM3600 RabbitCore
              

              • 2.10" x 1.20" x 0.62"
              • 512K SRAM
              • 512K Flash
              • 33 digital I/O
              • 22.1 MHz clock
              • 0.1" IDC header
              
              

              RCM3600 RabbitCore Development Kit
              Includes RCM3600 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM3610 RabbitCore
              

              • 2.10" x 1.20" x 0.62"
              • 128K SRAM
              • 256K Flash
              • 33 digital I/O
              • 22.1 MHz clock
              • 0.1" IDC header
              
              

              RCM3700 RabbitCore
              

              • 2.95" x 1.20" x 0.88"
              • 10Base-T, RJ-45 Ethernet
              • 512K SRAM
              • 512K Flash
              • 1 MB Serial Flash
              • 33 digital I/O
              • 22.1 MHz clock
              • 0.1" IDC header
              
              

              RCM3700 RabbitCore Development Kit
              Includes RCM3700 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM3710 RabbitCore
              

              • 2.95" x 1.20" x 0.88"
              • 10Base-T, RJ-45 Ethernet
              • 128K SRAM
              • 256K Flash
              • 1 MB Serial Flash
              • 33 digital I/O
              • 22.1 MHz clock
              • 0.1" IDC header
              
              

              RCM3720 RabbitCore
              

              • 2.95" x 1.20" x 0.88"
              • 10Base-T, RJ-45 Ethernet
              • 256K SRAM
              • 512K Flash
              • 1 MB Serial Flash
              • 33 digital I/O
              • 22.1 MHz clock
              • 0.1" IDC header
              
              

              RCM3750 RabbitCore
              

              • 2.95" x 1.20" x 0.89"
              • 10/100Base-T, RJ-45 Ethernet
              • 512K SRAM
              • 512K Flash
              • 1 MB Serial Flash
              • 33 digital I/O
              • 22.1 MHz clock
              • 0.1" IDC header
              
              

              RCM3750 RabbitCore Development Kit
              Includes 10/100base-T RCM3750 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM3900 Development Kit
              Jumpstart your evaluation and design efforts with a complete development kit, which includes RCM4510W ZigBee (Preview Release) core module, development board with prototyping area, Dynamic C 10 development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM3900 RabbitCore
              

              • 32 MB fixed NAND Flash
              • Up to 1 GB miniSD™ removable memory
              • 1.85" x 2.73" x 0.86"
              • 10/100Base-T, RJ-45 Ethernet
              • 512K prog. + 512K data SRAM
              • 512K Flash Memory
              • 52 general purpose I/O
              • 44.2 MHz clock
              
              

              RCM3910 RabbitCore
              

              • Up to 1 GB miniSD™ removable memory
              • 1.85" x 2.73" x 0.86"
              • 10/100Base-T, RJ-45 Ethernet
              • 512K prog. + 512K data SRAM
              • 512K Flash Memory
              • 52 general purpose I/O
              • 44.2 MHz clock
              
              

              RCM4000 Development Kit
              Includes RCM4000 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM4000 RabbitCore
              

              • Rabbit® 4000 microprocessor with Integrated Ethernet
              • Clock speed at 58.98 MHz with 16-bit memory
              • 32 MB NAND flash for data
              • 512K Flash / 512K SRAM
              • Up to 25 GPIO with multi-layer alternate pin functions
              • Up to 5 CMOS-compatible serial ports
              • Low power modes and speeds as low as 2 kHz
              • Low EMI
              • Optimized for use with Dynamic C® 10 – a powerful integrated development environment
              
              

              RCM4010 RabbitCore
              

              • Rabbit® 4000 microprocessor with Integrated Ethernet
              • Clock speed at 58.98 MHz with 16-bit memory
              • 512K Flash / 512K SRAM
              • Up to 25 GPIO with multi-layer alternate pin functions
              • Up to 5 CMOS-compatible serial ports
              • Low power modes and speeds as low as 2 kHz
              • Low EMI Optimized for use with Dynamic C® 10 – a powerful integrated development environment
              
              

              RCM4010 RabbitCore Development Kit
              Includes RCM4010 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM4050 RabbitCore
              

              • Rabbit® 4000 microprocessor with Integrated Ethernet
              • Clock speed at 58.98 MHz with 16-bit memory
              • 1MB Flash / 1MB SRAM
              • Up to 22 GPIO with multi-layer alternate pin functions
              • Up to 4 CMOS-compatible serial ports
              • Low power modes and speeds as low as 2 kHz
              • Low EMI Optimized for use with Dynamic C® 10 – a powerful integrated development environment
              
              

              RCM4100 RabbitCore
              

              • Rabbit® 4000 microprocessor
              • Clock speed at 58.98 MHz
              • 29 GPIO with multi-level alternate pin functions
              • 6 CMOS-compatible serial ports
              • 512K Flash / 512K SRAM standard
              • Low power modes and speeds as low as 2 kHz Low EMI Small footprint at 1.41" x 1.88" (36mm x 48mm)
              • Optimized for use with Dynamic C® 10, a powerful integrated development environment
              
              

              RCM4100 RabbitCore Development Kit
              Includes RCM4100 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM4110 RabbitCore
              

              • Rabbit® 4000 microprocessor
              • Clock speed at 29.49 MHz
              • 40 GPIO with multi-level alternate pin functions
              • 6 CMOS-compatible serial ports
              • 512K Flash / 256K SRAM standard
              • Low power modes and speeds as low as 2 kHz Low EMI Small footprint at 1.41" x 1.88" (36mm x 48mm)
              • Optimized for use with Dynamic C® 10, a powerful integrated development environment
              
              

              RCM4110 RabbitCore Development Kit
              Includes RCM4110 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM4120 RabbitCore
              

              • Rabbit® 4000 microprocessor
              • Clock speed at 58.98 MHz
              • 40 GPIO with multi-level alternate pin functions
              • 6 CMOS-compatible serial ports
              • 512K Flash / 512K SRAM standard
              • Low power modes and speeds as low as 2 kHz Low EMI Small footprint at 1.41" x 1.88" (36mm x 48mm)
              • Optimized for use with Dynamic C® 10, a powerful integrated development environment
              
              

              RCM4200 RabbitCore
              

              • 1.84” × 2.42” × 0.84”
              • 8 MB Serial Flash
              • 512K Flash / 512K SRAM
              • 8-channel, 12-bit A/D converter
              • Up to 35 GPIO
              • 29.49-58.98 MHz clock
              • 1.27 mm IDC header
              
              

              RCM4200 RabbitCore Development Kit
              Includes RCM4200 microprocessor core module, development board with prototyping area, Dynamic C development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM4210 RabbitCore
              

              • 1.84” × 2.42” × 0.84”
              • 4 MB Serial Flash
              • 512K Flash / 512K SRAM
              • 8-channel, 12-bit A/D converter
              • Up to 35 GPIO
              • 29.49-58.98 MHz clock
              • 1.27 mm IDC header
              
              

              RCM4300 RabbitCore
              

              • Rabbit® Microprocessor at 58.98 MHz
              • 512KB Data SRAM
              • 1MB Fast Program Execution SRAM
              • 2MB Serial Flash Memory (program)
              • Supports up to 1GB MiniSD™ Flash Memory card
              • 8-channel, 12 bits ADC
              • 5 Serial Ports
              
              

              RCM4300 RabbitCore Dev Kit
              

              Includes an RCM4300 core module with a miniSD™ card, a prototyping board, accessories, and development tools to get you up and running quickly. Along with our industry-proven Dynamic C® integrated development software – incorporating an editor, compiler, and in-circuit debugger – there is also the FAT file system familiar to many programmers, RabbitWeb for creating HTML web pages, and Rabbit’s Secure Socket Layer (SSL) utility.

              
              

              RCM4310 RabbitCore
              

              • Rabbit® Microprocessor at 58.98 MHz
              • 512KB Data SRAM
              • 512KB Fast Program Execution SRAM
              • 1MB Serial Flash Memory (program)
              • Supports up to 1GB MiniSD™ Flash Memory card
              • 6 Serial Ports
              
              

              RCM4400W Development Kit
              Jumpstart your evaluation and design efforts with a complete development kit, which includes RCM4000 microprocessor core module, development board with prototyping area, Dynamic C 10 development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM4400W RabbitCore
              

              • RabbitCore module running @ 58.98 MHz
              • Integrated Wi-Fi/802.11b wireless connectivity
              • 512K flash memory, 512K data SRAM, 512K fast program-execution SRAM
              • Up to 35 general-purpose I/O lines configurable
              • 3.3 V I/O lines
              • Low-power modes down to 2 kHz
              • Small size: 1.84” × 2.85” × 0.50” (47 mm × 72 mm × 13 mm)
              
              

              RCM4400W Wi-Fi Core Module Development Kit
              
              

              RCM4510W Development Kit
              Jumpstart your evaluation and design efforts with a complete development kit, which includes RCM4510W ZigBee (Preview Release) core module, development board with prototyping area, Dynamic C 10 development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).
              

              RCM4510W RabbitCore
              

              • RabbitCore module running @ 29.49 MHz
              • Designed for ZigBee™/802.15.4 wireless connectivity
              • 512K flash memory, 512K data SRAM
              • Up to 40 general-purpose I/O lines configurable
              • Up to 9 additional general-purpose I/O lines (up to four of which may be set up as analog inputs) available through the ZigBee modem available through the on-board ZigBee compliant RF module
              • Small size: 1.84 × 2.85 × 0.54 (47 mm × 72 mm × 14 mm)
              
              

              RCM4510W ZNet 2.5 Core Module Development Kit
              
              

              RCM5400W Development Kit
              Jumpstart your evaluation and design efforts with a complete development kit, which includes RCM5400W microprocessor core module, development board with prototyping area, Dynamic C 10 development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter.
              

              RCM5400W RabbitCore
              

              • RabbitCore running @ 73.73 MHz
              • 512K flash memory, 512K data SRAM, 512K fast program execution SRAM
              • 1 MB Serial Flash Memory
              • 39 lines of digital I/O
              • Integrated IEEE 802.11b/g Wi-Fi
              • Up to 6 serial ports
              • Small size: 1.8" x 2.85" x 0.50" (47 mm x 72 mm x 13 mm)
              
              

              RCM5450W RabbitCore
              

              • RabbitCore running @ 73.73 MHz
              • 1 MB flash memory, 512K data SRAM, 1 MB fast program execution SRAM
              • 2 MB Serial Flash Memory
              • 39 lines of digital I/O
              • Integrated IEEE 802.11b/g Wi-Fi
              • Up to 6 serial ports
              • Small size: 1.8" x 2.85" x 0.50" (47 mm x 72 mm x 13 mm)
              
              

              RCM5600W Deluxe Development Kit
              

              Jumpstart your evaluation and design efforts with a deluxe development kit. The RCM5600W development kit includes the RCM5600W microprocessor core module, development board with prototyping area, Dynamic C 10 development system and complete documentation on CD-ROM, USB cable for programming and debugging, Getting Started manual. The deluxe kit also includes power supplies, and additional protyping boards for specific sample programs.

              
              

              RCM5600W Deluxe Development Kit
              
              

              RCM5600W Standard Development Kit
              

              Jumpstart your evaluation and design efforts with either a standard development kit. The RCM5600W development kit includes the RCM5600W microprocessor core module, development board with prototyping area, Dynamic C 10 development system and complete documentation on CD-ROM, USB cable for programming and debugging, Getting Started manual.

              
              

              RCM5700 Deluxe Development Kit
              

              The Deluxe Development kit includes Digital I/O and Serial Communication accessory boards to help illustrate the RCM5700 features by running additional sample programs included with Dynamic C. You will also be able to write and test software for the RCM5700 modules, including Ethernet or TCP/IP applications.

              
              

              RCM5700 Standard Development Kit
              

              The standard development kit has the essentials that you need to jumpstart your evaluation and design efforts. The RCM5700 Standard Development Kit includes a complete Dynamic C software development system, the RCM5700 and a development board that will allow you to evaluate the RCM5700. Digital I/O and serial accessory boards will help to illustrate the RCM5700 features by running the sample programs included with Dynamic C. You will also be able to write and test software for the RCM5700 modules, including Ethernet or TCP/IP applications.

              
              

              RCM5700W Deluxe Development Kit
              
              

              Reset Chip, ETL811L, SOT-143, Surface-Mount
              10 pieces.
              

              RIO Programmable I/O Application Kit
              

              Jumpstart your evaluation and design efforts with a complete Rabbit RIO Programmable I/O Chip Application Kit, which includes a Rabbit RIO, development board with prototyping area, Dynamic C 10 development system and complete documentation on CD-ROM, serial cable for programming and debugging, Getting Started manual, and AC adapter (U.S./Canada only).

              
              

              RJ-45 Connector w/ 10/100Base-T Trans., Surface-Mount
              10 pieces.
              

              RJ-45 Connector w/ 10/100Base-T Trans., Through-Hole
              10 pieces.
              

              RJ-45 Connector w/ 10Base-T Transformer, Through-Hole
              10 pieces.
              

              RN1100 RabbitNet Digital I/O Expansion Card
              

              • Digital I/O Expansion Card
              • 24 protected and filtered digital inputs
              • 16 high-speed protected sinking/sourcing digital outputs
              • Four 10-bit analog input channels
              • 100 mm DIN rail tray mountable
              • RabbitNet interface: 1 Megabit per second using standard Ethernet cable, up to 10 m (33 ft) away from master (RS-422)
              
              

              RN1200 RabbitNet A/D Expansion Card
              

              • 8 single-ended 11-bit or 4 differential 12-bit analog inputs
              • Software-controlled voltage ranges
              • 100 mm DIN rail tray mountable
              • RabbitNet interface: 1 Megabit per second using standard Ethernet cable, up to 10 m (33 ft) away from master (RS-422)
              
              

              RN1300 RabbitNet D/A Expansion Card
              

              • 8 channels of 12-bit analog outputs
              • Software-controlled voltage ranges
              • 100 mm DIN rail tray mountable
              • RabbitNet interface: 1 Megabit per second using standard Ethernet cable, up to 10 m (33 ft) away from master (RS-422)
              
              

              RN1400 RabbitNet Relay Expansion Card
              

              • 6 SPDT relays
              • 10 A maximum switching current (5 A DC)
              • 100 mm DIN rail tray mountable
              • RabbitNet interface: 1 Megabit per second using standard Ethernet cable, up to 10 m (33 ft) away from master (RS-422)
                
              
              

              RN1600 Expansion Kit
              Includes an RN1600, 0.156” pitch crimps, connector set (assortment of various headers and sockets of compatible design), cable set, display set (one 4 x 20 LCD, one 2 x 20 LCD), keypad set (1 each: 10 x 4, 3 x 4, 2 x 6, membrane keypads)
              

              RN1600 RabbitNet Keypad/Display Interface Card
              

              • Low-cost solution for keypad/display embedded system designs
              • Works with multiple keypad arrays and display sizes
              • RN1600 Expansion Kit available for prototype sizing
              • 100 mm DIN-rail tray mountable
              • RabbitNet interface (RS-422): 1 Megabit per second using standard Ethernet cable, up to 10 m (33 ft) away from master
              
              

              RS-232-to-USB Converter Cable
              This converter allows Rabbit-based systems to be programmed via the USB (universal serial bus) port rather than directly from a serial port. This is necessary if your laptop or computer lacks a serial port.
              

              SBC Demonstration Board
              Interfaces to Rabbit® single-board computers to demonstrate I/O and TCP/IP capabilities
              

              Screw Terminal Adapter/Prototyping Board
              Connects IDC connectors to screw terminals.
              

              Secure Embedded Web Application Kit 2.0
              
              

              Secure Embedded Web Application Kit 2.0
              The Secure Embedded Web AppKit provides optimized hardware/software development tools to easily build secure web interfaces for new and existing applications.
              

              SF1004 Serial Flash Expansion Board
              Designed to significantly increase the data-storage capabilities of embedded control systems powered by our single-board computers (SBCs). Model offers 4 megabytes of memory.
              

              SF1008 Serial Flash Expansion Board
              Designed to significantly increase the data-storage capabilities of embedded control systems powered by our single-board computers (SBCs). Model offers 8 megabytes of memory.
              

              Simple Sensor Application Kit
              The Simple Sensor Application Kit provides sample applications based on 1-Wire® devices to help users better understand and implement the 1-Wire communications bus using a prototyping board and a RabbitCore® module.
              

              SMB Network Storage Application Kit
              

              Rabbit’s SMB Network Storage Application kit gives you all the tools and you need to design, build, and test an embedded system using a Windows or Linux server as a networked file storage system. Kit includes an RabbitCore® RCM4010 module, Dynamic C® version 10, and an SMB drive.

              
              

              SMD 1 Chip Quick SMD Removal Kit
              
              

              SNMP Software Module 1.01
              Version 1.01
              Download delivery
              

              SNMP Software Module for Dynamic C 8
              Version 1.01
              Shipped CD
              

              SOIC Surface-Mount SRAM
              128K x 8, 55 ns, 5 V
              10 pieces.
              

              SR9000 Smart Star Starter Package
              
              

              SR9010 Smart Star Back Plane
              Backplane chassis features 8 slots, 1 for CPU and 7 for any combination of I/O cards. Remote display connector.
              

              SR9050 Smart Star Back Plane
              Backplane chassis features 4 slots, 1 for CPU and 3 for any combination of I/O cards. Remote display connector.
              

              SR9150 Smart Star CPU Card
              Ethernet CPU card is powered by Rabbit 2000 microprocessor at 22.1 MHz. 512K Flash (2 x 256K), 128K SRAM (supports 512K), and 10Base-T Ethernet with RJ-45 connector.
              

              SR9150 Smart Star CPU Card with 512K SRAM
              Ethernet CPU card is powered by Rabbit 2000 microprocessor at 22.1 MHz. 512K Flash (2 x 256K), 512K SRAM, and 10Base-T Ethernet with RJ-45 connector.
              

              SR9160 Smart Star CPU Card
              CPU card is powered by Rabbit 2000 microprocessor at 22.1 MHz. 512K Flash (2 x 256K), 128K SRAM (supports 512K).
              

              SR9160 Smart Star CPU Card with 512K SRAM
              CPU card is powered by Rabbit 2000 microprocessor at 22.1 MHz. 512K Flash (2 x 256K), 512K SRAM.
              

              SR9200 Smart Star Digital I/O Cards
              16 inputs and 8 outputs, sinking.
              

              SR9205 Smart Star Digital I/O Card
              16 inputs and 8 outputs, sourcing.
              

              SR9210 Smart Star Digital I/O Card
              8 inputs and 16 outputs, sinking.
              

              SR9220 Smart Star Digital I/O Card
              8 inputs and 8 outputs, sinking.
              

              SR9300 Smart Star A/D Card
              Eleven 12-bit analog inputs (0–10 V).
              

              SR9310 Smart Star A/D Card
              Eleven 12-bit analog inputs (±10 V).
              

              SR9320 Smart Star A/D Card
              Eleven 12-bit analog inputs (4–20 mA).
              

              SR9400 Smart Star D/A Card
              Eight 12-bit analog outputs (0–10 V).
              

              SR9410 Smart Star D/A Card
              Eight 12-bit analog outputs (±10 V).
              

              SR9420 Smart Star D/A Card
              Eight 12-bit analog outputs (4–20 mA).
              

              SR9500 Smart Star Relay Card
              6 relays: 1 SPDT, 5 SPST, including snubbers.
              

              SR9510 Smart Star Relay Card
              8 SPDT relays, no on-board snubbers.
              

              STSOP Surface-Mount SRAM
              128K x 8, 55 ns, 3.3 V
              10 pieces.
              

              TCP/IP Development Board
              

               

              
              

              Telephone Technical Support Module
              1 year telephone technical support agreement
              

              The Way of the Rabbit (Spanish Language)
              With the great success of the two editions of his first book on Rabbit, engineer Sergio R. Caprile returns to surprise us with another installment that includes new features and and insights into the Rabbit universe. This second book presents Rabbit in action, with complete guides to advance application programs and gain new and different benefits, all with added extras like interesting examples of how to use Rabbit combined with Bluetooth technologies, color LCD displays, GSM, and FRAM memories among others. Additionally, Rabbit's new tools and benefits are described in detail like File Systems and RabbitWeb. This book is precisely for those that demand more, and for those just learning Rabbit, it will solve most of the technical questions they face as they begin to develop with Rabbit.. The book offers a wider view of embedded systems.
              

              TSOP Surface-Mount SRAM
              512K x 8, 15 ns, 3.3 v
              10 pieces.
              

              Unibox Enclosure
              Black plastic, with cover, baseplate, and mounting screws. Light pipes sold separately.
              

              USB Programming Cable with 1.27 mm Connectors
              USB Programming Cable has 1.27 mm connectors for all Rabbit 3000 based, Rabbit 4000 based, and Rabbit 5000 based (except for RCM3000/RCM3100, and LP3500, RCM5600W, and RCM5700). Connect a RabbitCore module to a USB port on your PC running the Dynamic C integrated development environment to download programs and monitor the module during debugging.
              

              USB Programming Cable with 2 mm Connectors
              USB Programming Cable has 2 mm connectors for Rabbit 2000 based products, RCM3000/RCM3100, and the LP3500. Connect a RabbitCore module to a USB port on your PC running the Dynamic C integrated development environment to download programs and monitor the module during debugging.
              

              USB Removable Memory Card Reader
              The USB removable memory card reader is a Rabbit-specific reader to help manage data to and from Rabbit-based devices that are equipped with an xD-Picture Card™ memory card socket and Dynamic C FAT software module. This enables fast retrieval of data from the card directly to a PC to be available for your application. The reader’s firmware is specifically developed to support only Rabbit-based systems using the Dynamic C FAT library, so it cannot be used as a reader for general purpose digital camera formatted files.
              

              Wireless Control Application Kit with Digi 24XStream RF Modem
              

              This Wireless Control Application Kit provides a reference to interface a license-free 2.4 GHz wireless data module to a new or existing Rabbit-based embedded system.

              The Wireless Control Application Kit comes with samples, libraries and hardware to integrate low-cost wireless connectivity operating at a frequency of 2.4 GHz with a Rabbit device. The kit contains one Rabbit single-board computer and two Digi RF modules for full application reference, which can also serve as a template for a robust wireless implementation where a serial connection is required. The Wireless Control Application Kit offers a serial connection alternative where wired cables are not practical to use as well as exemplifies the versatility and simplicity of adding wireless connectivity to an embedded application. Applications include simple remote monitoring, proximity sensor readings, wireless I/O control, and data transmission.

              
              

              Wireless Control Application Kit with Digi 9XCite RF Modem
              

              This Wireless Control Application Kit provides a reference to interface a license-free 900 MHz wireless data module to a new or existing Rabbit-based embedded system.

              The Wireless Control Application Kit comes with samples, libraries and hardware to integrate low-cost wireless connectivity operating at a frequency of 900 MHz with a Rabbit device. The kit contains one Rabbit single-board computer and two Digi RF modules for full application reference, which can also serve as a template for a robust wireless implementation where a serial connection is required. The Wireless Control Application Kit offers a serial connection alternative where wired cables are not practical to use as well as exemplifies the versatility and simplicity of adding wireless connectivity to an embedded application. Applications include simple remote monitoring, proximity sensor readings, wireless I/O control, and data transmission.

              
              

              top

              Feature Articles
              
              top